How to Install a Canon Printer Cartridge (4 Steps)

With the printer in the 'on' position, open the top cover of the Canon printer by lifting the cover straight up. The print cartridge heads will now move to center of the printer for installation.
Remove the empty ink cartridge from the packaging and discard. Remove the tape and protective film from the new cartridge. Hold the ink cartridge horizontally and remove the orange protective cap by twisting it 90 degrees.
Tilt the ink cartridge toward the ink cartridge holder and align the cartridge under the correct holder based on the color of ink you are installing. For instance, place the black ink cartridge under the black ink cartridge holder.
Insert the ink cartridge against the back end of the ink cartridge holder. Press down on the 'push' label until it clicks into place. The ink cartridge is labeled where you need to push to install it properly. Close the cover of the printer and allow the ink cartridge to be recognized by the printer. The power light may blink for several seconds. When the light stops blinking and is steady, the printer is ready for use.